BinTec X4000, User Manual

Page: 240 / 498

240 X4000 User’s Guide
Advanced Configuration of the Basic Unit with the Setup Tool
8
Table 8-35:
S
YSTEM
➧
K
EEPALIVE
M
ONITORING
➧
ADD
S
YSTEM
➧
K
EEPALIVE
M
ONITORING
lists all the hosts that are monitored by
Keepalive Monitoring. The reachability of the hosts is listed under State:
alive,
if the host was reachable on the last check, down, if the host was not reachable.
To do Proceed as follows to configure the example shown in Figure 8-3, page 237 :
➤
Go to
S
YSTEM
➧
K
EEPALIVE
M
ONITORING
.
➤
Press ADD to add the first host that is to be monitored by X4000 with
Keepalive Monitoring.
➤
Enter Group:
0
.
➤
Enter IPAddress: 192.168.1.10 .
FirstIfIndex Defines the first interface of an interface range
in
X4000 , for which the action defined under
DownAction is to be executed.
Possible values:
10001 ... 15000 (default value:
10001).
Interfaces with indices from 10001 to 15000 are
provided for dialup connections to WAN
partners. The default value
10001 designates
the interface to the first WAN partner
configured in
X4000 (dialup connection). The
indices of other interfaces are given in the
Software Reference .
Range Defines the range of interfaces in X4000 , for
which the action defined under DownAction is
to be executed.
If you set FirstIfIndex = 10001 and Range = 0,
only the interface with the index 10001 is
affected.
If you set FirstIfIndex = 10001 and Range =
4999 (default value), the interfaces with indices
10001 to 15000 are affected.
Field Meaning