BinTec X4000, User Manual

Page: 65 / 498

X4000 User’s Guide 65
Status Messages via LEDs
3
The LEDs indicate the following status messages:
Table 3-3: LED status messages of a PRI/G.703 expansion card
LAN Expansion Card X4E-2FE
The LAN expansion card has four LEDs. The two LEDs on the left side (red and
green) are assigned to the first port (Unit 0) and the two LEDs on the right side
(red and green) to the second port (Unit 1).
The red LEDs light up if Ethernet collisions occur and the green LEDs indicate
activity on the Ethernet:
Table 3-4: Status messages of LEDs on a LAN expansion card
LED
lights LED
flashes
Meaning
– – Port is not activated by license
X – Port is in G.703 Mode (license for G.703 or PRI is
activated and
G.703 is selected under ISDN Line
Framing)
– X Port is in PRI Mode (license for PRI is activated and
G.703 is not selected under ISDN Line Framing)
LED
flashes LED
lights
Meaning
green
LED – X 100 Mbps Mode (Fast Ethernet)
X – 10 Mbps Mode (Ethernet)
– – Port is not available
red
LED – X Ethernet collision
– – No Ethernet collision