BinTec X4000, User Manual

Page: 115 / 498

X4000 User’s Guide 115
Configuring a PC
6
6.4 Configuring a PC
If you have selected communications applications (CAPI) during the
configuration, you will be asked to carry out CAPI configuration now. Among
other things, CAPI allows you to send and receive fax messages and to use an
answering machine.
Remote CAPI
configuration
➤
Click Yes to start configuration. In the Remote CAPI tab, enter the IP
address of your
X4000 and the user name and password of users of
communications applications set up previously with the Configuration
Wizard, if these have not already been entered. Click Use these values.
Click OK.
RVS-COM Lite To be able to use fax services on your PC, you must install a CAPI application
such as RVS-Com Lite. RVS-Com Lite is included on your BinTec Companion
CD.
COM port driver If you want to use your data communications network with BinTec’s Remote
CAPI, RVS-Com Lite will provide you with the necessary COM port driver.
RVS-COM Lite
installation
➤
To install RVS-COM Lite, click RVS-Com Lite in the setup program and
follow the instructions. An online help system is also available.
Internet access with
X4000
You can set up WAN access over X4000 , e.g. to the Internet, for all PCs located
in a network with X4000 . In order to do this, you must enter X4000 as gateway
and as DNS for all those PCs that were not configured as DHCP clients.
Proceed as follows:
➤
In the start menu click Settings
➧
Control Panel. Double click Network.
➤
Select TCP/IP in the network components list (for Windows NT it is in the
Protocol tab) and click Properties.
➤
Enter the IP address of X4000 in the Gateway tab under New Gateway.
Click Add. (Windows NT: Click the IP Address tab and enter the IP
address of
X4000 under Standard Gateway).
Please note: The license for RVS-COM Lite is a single user license. You can
purchase additional licenses from your dealer.