BinTec X4000, User Manual

Page: 195 / 498

X4000 User’s Guide 195
General WAN Settings
8
The general PPP settings are configured in PPP:
Table 8-6:
PPP
To do Proceed as follows to define the general PPP settings:
➤
Go to PPP.
➤
Select Authentication Protocol, e.g. CHAP + PAP + MS-CHAP.
Field Meaning
Authentication Protocol Defines the PPP authentication protocol offered
to the caller first. Possible values:
■
PAP: PAP only
■
CHAP: CHAP only
■
CHAP + PAP: first CHAP, then PAP
■
MS-CHAP: MS-CHAP only
■
CHAP + PAP + MS-CHAP: first CHAP, if
denied then the protocol required by the
caller
■
MS-CHAP V2: MS-CHAP version 2 only
■
none: no PPP authentication
Radius Server
Authentication Settings for RADIUS server authentication. For
RADIUS, see
Extended Features Reference .
PPP Link Quality
Monitoring Defines whether Link Quality Monitoring is
executed for PPP connections. Possible
values:
■
no, is not executed.
■
yes, the connection statistics are stored in
the
➤➤
MIB table biboPPPLQMTable.
PPPoE Ethernet
Interface Defines the interface used by PPP-over-
Ethernet for using an ADSL connection (see
chapter 7.2.3, page 155 ).