BinTec X4000, User Manual

Page: 182 / 498

182 X4000 User’s Guide
Basic Configuration of Basic Unit with Setup Tool
7
➤
Mark the WAN partner for which you want to activate NAT (e.g. GoInternet)
and press Return.
Another menu window opens:
To do Make the following entries:
➤
Select Network Address Translation: on.
➤
Press SAVE.
Network Address Translation is activated for the selected interface or WAN
partner.
➤
Leave
IP
➧
N
ETWORK
A
DDRESS
T
RANSLATION
with EXIT.
➤
Leave
IP with EXIT.
You have returned to the main menu and have configured a WAN partner.
In order to permit certain external connections to hosts in the LAN in spite of
activated NAT, you must define the sessions allowed exactly. How to do this is
described in chapter 10.2.7, page 331 .
7.3.2 Examples
The WAN partner settings for some example configurations are shown below:
■
"Internet Access over T-Online", page 183
■
"Internet Access over Compuserve", page 184
X4000 Setup Tool BinTec Communications AG
[IP][NAT][CONFIG]: NAT Configuration (GoInternet) MyRouter
Network Address Translation on
Configuration for sessions requested from outside
Service Destination Source Dep. Dest. Dep. Port Remap
ADD DELETE SAVE CANCEL
Use <Space> to select