BinTec X4000, User Manual

Page: 109 / 498

X4000 User’s Guide 109
6
6 Fast Configuration with the
Configuration Wizard (Basic Unit)
With the Configuration Wizard on your BinTec Companion CD, BinTec
Communications AG offers you a quick and convenient way to start running
your X4000 . You can perform basic configuration via the serial connection of
your Windows PC. This basic configuration includes all the important settings of
the router, access to the Internet via an Internet Service Provider (ISP), as well
as connection to a WAN partner (e.g. to a corporate headquarters). As the
Configuration Wizard guides you step by step through the configuration,
detailed knowledge of networking technologies is not necessary. Graphic
illustrations and a detailed online help system you can access at any time during
the configuration give you additional support.
The Configuration Wizard is one of several possible ways of configuring your
X4000 . Access to your X4000 in this case is via the serial interface. Please note
that you can only use the Configuration Wizard to configure your ISDN BRI
interface on the basic unit. For configuration of WAN connections over the X.21/
V.35/V.36 or X.21bis interface, you must use the Setup Tool. Advanced
configuration ( chapter 8, page 187 ) and setting up the security functions
( chapter 10, page 307 ) are done after this using the Setup Tool.
This chapter tells you how to carry out the following tasks:
■
In advance of configuration ( chapter 6.1, page 110 )
■
Install Windows software:
– Install BRICKware for Windows ( chapter 6.2, page 112 )
– Configure X4000 with the Configuration Wizard ( chapter 6.3,
page 113 )
■
Make possible additional settings on your PC ( chapter 6.4, page 115 )
– Configure the Remote CAPI interface ( "Remote CAPI configuration",
page 115 )
– Install RVS-COM Lite ( "RVS-COM Lite installation", page 115 )
– Set up PC for WAN access ( "Internet access with X4000", page 115 )
You can test your configuration at the end of the chapter.