BinTec X4000, User Manual

Page: 66 / 498

66 X4000 User’s Guide
Hardware Description and Installation
3
3.5 Boot Sequence
X4000 passes through various functional states on booting:
■
Start Mode
■
BOOTmonitor Mode
■
Normal Operation Mode
After several selftests have been performed successfully in Start Mode, X4000
changes to the BOOTmonitor Mode. The BOOTmonitor prompt is displayed if
you are connected to X4000 via a terminal program.
BOOTmonitor Press Space within four seconds of the display of the BOOTmonitor prompt if
you want to use the BOOTmonitor functions. If you do not make an entry within
four seconds, X4000 changes back to normal operation mode.
Functions The BOOTmonitor makes the following functions available, which you select by
entering the relevant digit (for more detailed information, refer to Software
Reference ):
■
(1) Boot system:
X4000 loads the compressed boot file from the flash memory to the RAM
memory. This happens automatically when started.
■
(2) Software update via TFTP:
X4000 performs a software update via a TFTP server.
■
(3) Software update via XMODEM:
X4000 performs a software update over a serial interface with XMODEM.
■
(4) Delete configuration:
X4000 is reset to the unconfigured ex works state. All configuration files are
deleted and the BOOTmonitor settings are set to the default values.
■
(5) Default BOOTmonitor parameters:
You can change the default settings of X4000 ’s BOOTmonitor, e.g. the
baud rate for serial connections.