BinTec X4000, User Manual

Page: 372 / 498

372 X4000 User’s Guide
Configuration Management
11
To do To update the software (boot image), proceed as follows:
➤
Type in the URL
www.bintec.de
in your browser (e.g. Internet Explorer
or Netscape Navigator).
The BinTec home page opens.
➤
Click "Solutions and Products" and then "Download".
Here you will find the latest software and documentation for BinTec
products.
➤
Click "X4000".
Here you will find the latest software and documentation for X4000 .
➤
Click the current boot image with the right mouse button, e.g. Boot Image
Rel. 5.1 Rev. 4.
➤
In the context menu, click Save link as...
➤
Type in the directory and name under which the new boot image should be
saved on your PC. The directory is normally C:\BRICK for Windows PCs
and /tftpboot for Unix workstations. You can use this name.
➤
Press SAVE.
The boot image is saved on your PC.
➤
Activate a TFTP server on your PC.
For a Windows PC: Click the Windows Start menu and then Program
➧
BRICKware
➧
DIME Tools to start DIME Tools (for installation of DIME
Tools, see chapter 6.2, page 112 ). Activate the TFTP server.
For a Unix computer: Follow the instructions in the Software Reference .
➤
Log in to X4000 , if you have not already done so.
➤
Deactivate auto logout with
t 0
.
➤
In the SNMP shell, type in
update <IP address> <file name>
.
The
<IP address>
is the IP address of the TFTP server, e.g. the IP
address of your Windows PC on which the TFTP server of DIME Tools is
Do not turn X4000 off during the update!
Before starting the update, deactivate auto logout by entering
t 0
in the SNMP
shell.