BinTec X4000, User Manual

Page: 215 / 498

X4000 User’s Guide 215
Settings Specific to WAN Partners
8
➤
Leave WAN P
ARTNER
➧
ADD
➧
WAN N
UMBERS
➧
ADD
with Exit.
For dynamic assignment of the IP address by the Internet Service Provider,
proceed as follows:
➤
Go to WAN P
ARTNER
➧
ADD
➧
IP.
➤
Select IP Transit Network: dynamic client.
➤
Press SAVE.
➤
Press SAVE.
➤
Leave WAN P
ARTNER
with Exit.
You have returned to the main menu.
BOD for IP-Based Applications (Optional)
Filters and rules BOD for IP-based applications is configured by filters and rules in a similar way
to Access Lists for IP packets (see chapter 10.2.8, page 335 ). First filters are
defined that determine which IP packets (and thus applications) are to influence
the available bandwidth. If several filters are defined, they can be interlinked
using a rule chain.
Proceed as follows to define suitable filters:
➤
Go to IP
➧
B
ANDWIDTH ON
D
EMAND
(BOD)
➧
F
ILTER
➧
A
DD
.
➤
Enter Description, e.g. mail_smtp_out.
➤
Select Protocol, e.g.
tcp.
➤
Enter Destination Address, e.g. 172.16.08.15.
➤
Enter Destination Mask, e.g. 255.255.255.255.
➤
Select Destination Port: e.g. specify.
➤
Enter Specify Port, e.g. 25 (port for SMTP).
➤
Press SAVE.
A list of all the previously defined filters appears.
➤
Leave
IP
➧
B
ANDWIDTH ON
D
EMAND
(BOD)
➧
F
ILTER
with Exit.
A rule for BOD is defined in a similar way to a rule for IP packets (see
chapter 10.2.8, page 335 ). Different rules normally consist of different filters