BinTec X4000, User Manual

Page: 88 / 498

88 X4000 User’s Guide
Configuration Requirements
4
Figure 4-4, page 87 shows the Setup Tool menus available on X4000 . When
you activate the necessary license, X4000 detects this and displays the
corresponding menus (for entering license, see chapter 7.1.1, page 121 ).
Summary To help you find your bearings during configuration, the menus are briefly
explained below.
Menu Function
L
ICENSES
This menu is for entering the license information printed on the license card
supplied with the equipment. This menu is also used for activating extra
licenses.
S
YSTEM
In this menu, you enter the basic system settings of X4000 , e.g. system
name and passwords.
F
AST
E
THERNET This menu is for configuring the
➤➤
LAN interface of X4000 . Here you
enter data such as the IP address and netmask of X4000 .
ISDN S0
This menu is for configuring the ISDN interface of X4000 . Here you enter
data such as the type of ISDN connection to which X4000 is connected.
The submenu ISDN S0
➧
I
NCOMING
C
ALL
A
NSWERING
is for assigning the
available ISDN numbers to the desired services (e.g. PPP routing,
➤➤
CAPI ,
➤➤
ISDN Login ).
S
ERIAL
This menu is for configuring the serial WAN interfaces of X4000 .
WAN P
ARTNER Here you define all your WAN partners, e.g. your
➤➤
Internet Service
Provider (
➤➤
ISP ). All the WAN partners entered are displayed in a list
that includes the name of partner, protocol used and current status of each.