BinTec X4000, User Manual

Page: 280 / 498

280 X4000 User’s Guide
Configuration of Expansion and Resource Cards with the Setup Tool
9
distribution of incoming calls over the ISDN BRI interface of the basic unit.
For a detailed description, see
"Incoming call answering", page 141 .
➤
Use ADD to add a new entry or select an existing entry. Confirm with
Return to change the entry.
➤
Select the Item, e.g. PPP (routing).
➤
Enter the Number, e.g. 091112330.
➤
Select the Mode, e.g. right to left.
➤
Select the Bearer, e.g.
data.
➤
Press SAVE.
You have returned to menu X4E-3BRI, ISDN S0
➧
U
NIT
0
➧
I
NCOMING
C
ALL
A
NSWERING
. The entries are saved and displayed in the list.
You have now assigned a possible service ( PPP (routing)) to one of your
numbers ( 0911 123 30). This means that when a data call is received for
the Called Party Number 0911 123 30, it is put through to the PPP (routing)
service.
➤
Repeat these steps until you have assigned to all phone numbers the
services to be reached under these numbers.
You have now configured Incoming Call Answering for this ISDN BRI
interface and
X4000 distributes the incoming calls to the internal services.
➤
Leave X4E-3BRI, ISDN S0
➧
U
NIT
0
➧
I
NCOMING
C
ALL
A
NSWERING
with
EXIT.
➤
Press SAVE.
➤
If applicable, go to X4E-3BRI, ISDN S0
➧
U
NIT
1 to configure the second
interface.
➤
If applicable, go to X4E-3BRI, ISDN S0
➧
U
NIT
2 to configure the third
interface.
WAN partner To enable X4000 to make connections to networks or hosts outside your LAN,
you must configure the partners you want to connect to as WAN partners on
your X4000 . This applies to outgoing connections, incoming connections and
leased lines. Refer to chapter 7.3, page 159 .