BinTec X4000, User Manual

Page: 181 / 498

X4000 User’s Guide 181
Configuring WAN Partners
7
➤
Select Network: WAN without transit network.
➤
Enter Destination IP Address, e.g.
10.1.2.0.
➤
Enter Netmask, e.g. 255.255.255.0.
➤
Enter Partner / Interface, e.g. LittleIndian.
➤
Enter Metric, e.g. 1.
➤
Press SAVE.
You have returned to IP
➧
R
OUTING
. The entries have been saved and the
newly entered or modified route is listed.
➤
Repeat these steps if you have to enter several routes.
Activating Network Address Translation (NAT)
Activating NAT Here you can activate Network Address Translation (
➤➤
NAT) for your WAN
partner. This conceals your whole network to the outside world with just one IP
address. You should certainly do this for your connection to the Internet Service
Provider (ISP).
More information about Network Address Translation (NAT) can be found in
chapter 10.2.7, page 331 .
Proceed as follows to activate NAT:
➤
Go to
IP
➧
N
ETWORK
A
DDRESS
T
RANSLATION
:
X4000 Setup Tool BinTec Communications AG
[IP][NAT]: NAT Configuration MyRouter
Select IP Interface to be configured for NAT
Nat static mappings
GoInternet on 2
LittleIndian off
en1 off
en1-snap off
EXIT
Press <Ctrl-n>, <Ctrl-p> to scroll, <Return> to edit/select