BinTec X4000, User Manual

Page: 172 / 498

172 X4000 User’s Guide
Basic Configuration of Basic Unit with Setup Tool
7
The following parts of the menu are relevant for this configuration step:
Table 7-20: WAN P
ARTNER
➧
ADD
➧
A
DVANCED
S
ETTINGS
To do Make the following entries:
➤
Enter Static Short Hold (sec), e.g. 20.
➤
Enter Idle for Dynamic Short Hold (%), e.g. 0.
➤
Confirm with OK.
You have returned to WAN P
ARTNER
➧
ADD.
X4000 Setup Tool BinTec Communications AG
[WAN][ADD][ADVANCED]: Advanced Settings (BigBoss) MyRouter
Callback no
Static Short Hold (sec) 20
Idle for Dynamic Short Hold (%) 0
Delay after Connection Failure (sec) 300
Layer 1 Protocol
ISDN 64 kbps
Channel Bundling no
Extended Interface Settings (optional) >
OK CANCEL
Use <Space> to select
Field Meaning
Static Short Hold (sec) Idle time in seconds for static short hold.
Example values for trunk connections:
60, only effective if charging pulses are
transmitted during the connection (AOCD),
20 otherwise.
Idle for Dynamic Short
Hold (%) Idle time in % for dynamic Short Hold.
Only effective if charging pulses are transmitted
during the connection (AOCD).