BinTec X4000 User Manual Download Page 211

Page: 211 / 498

X4000

User’s Guide

211

Settings Specific to WAN Partners

➤

Enter Destination X.25 Address, e.g.

019011.

➤

Press SAVE.

➤

Leave

X.25

➧

OUTING

➧

ADD

with Exit.

➤

Leave

X.25

➧

OUTING

with Exit.

You have returned to the main menu.

Configuring AO/DI

partner as WAN partner

To define an AO/DI-capable PPP interface, proceed as follows:

➤

Go to

WAN P

ARTNER

➧

ADD

➤

Enter Partner Name, e.g.

AODI partner.

➤

Select Encapsulation:

PPP.

Proceed as follows to make the PPP settings:

➤

Go to

WAN P

ARTNER

➧

ADD

➧

PPP.

➤

Select Authentication, e.g.

CHAP.

➤

Leave out Partner PPP ID.

➤

Enter Local PPP ID, e.g.

bintec_router.

➤

Enter PPP Password twice, e.g.

secret.

An asterisk appears on the screen as a place marker for each letter you

enter for the password.

➤

Confirm with OK.

To activate AO/DI on the PPP interface and enter the X.25 address, proceed as

follows:

➤

Go to

WAN P

ARTNER

➧

ADD

➧

DVANCED

ETTINGS

Summary of Contents for X4000


















































































































































































































































































































































































































































































































Search results

Summary of Contents for X4000

Reviews:

Related manuals for X4000

Brands by name

Popular brands

BinTec X4000, User Manual

Search results

Summary of Contents for X4000

Reviews:

Related manuals for X4000

Brands by name

Popular brands