ZONARE Z.ONE, Руководство по обслуживанию

Страница: 73 / 225

Q00110 Rev A 8/06 Page 73 of 225
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
8 DICOM CONFIGURATION
8.1 “DICOM” Configuration Overview
Prior to installation of the Z.ONE at any medical facility utilizing a DICOM network environment, a
“Pre-Install Survey Form” (ZONARE P/N: F00044) should have been completed. This form is used
for obtaining, in advance, detailed networking and
DICOM configuration values (IP addresses, AE
Titles, etc.) from the IT System Administrator at the facility. These site-specific values/parameters
are required prior to programming the entries in the DICOM configuration menus on the Z.ONE.
A copy of this “Pre-Install Survey, Form” is included on the following pages, as a backup resource.
IMPORTANT
Once all of the DICOM parameters have been configured into the required DICOM
setup menus, it will be necessary to power down and reboot
the
z.one
in order to
initialize the new network connections with the target devices
.
Z.ONE
Network Address Info Requirements:
The following information, defining the
z.one
’s identity on the local network at the medical
facility and must be assigned by the facility’s IT Network Administrator , prior to beginning the
setup of the DICOM configuration menus on the
z.one
.
Definition Assigned Value Example Only
•
z.one
’s assigned (IP Address):
_ _ _ . _ _ _ . _ _ _ . _ _ _
10.94.1.105
•
z.one
’s assigned (Subnet Mask):
_ _ _ . _ _ _ . _ _ _ . _ _ _
255.255.0.0
•
z.one
’s assigned (Gateway Address):
_ _ _ . _ _ _ . _ _ _ . _ _ _
10.94.0.254