Q00110 Rev A 8/06
Page 55 of 225
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
10.
Press down fully and then release, on the brake pedal (at the front of the
z.one
), to release
locking of the SuperCart’s wheels.
Figure 31: Brake release of wheels
11.
Rotate the wheels from their 90 degree angled storage position, to be inline with the loading
ramp and enable rolling the system out of crate.
12.
Being careful to control the system’s momentum, roll the
z.one
down the ramp, and out of
crate.
13.
Remove all protective plastic wrap and foam packaging materials.
14.
Inspect the entire
z.one
for damage, paying close attention to the LCD display on the
SuperCart.
15.
Move the
z.one
to the installation area.
5.4.2
miniCart:
STEPS:
1.
Prior to opening any packaging, inspect the “Tip-n-Tell” indicator (attached to the outside of the
main shipping box) for signs that the
z.one
has been subjected to shock or tilt conditions during
shipment. Make notes of any discrepancies, and immediately report to the shipping carrier.
2.
Remove all banding straps surrounding the cardboard main shipping container.
3.
Grasping the sides, slide the cardboard main shipping box upwards, exposing the miniCart and
container contents. Continue lifting until the cardboard box can be completely removed, set aside.
Содержание Z.ONE
Страница 1: ......
