ZONARE Z.ONE, Руководство по обслуживанию

Страница: 163 / 225

Q00110 Rev A 8/06 Page 163 of 225
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
Barco “OSD” (Operational Set-up Display) Menu Specifications Table
Top Level Menu Level 2 Menu Items Level 3 Menu Items Options ZONARE
Setting
Description
Autoset
Full Autoset -> Run “Full”
w/Bar pattern
displayed
Performs Automatic
Geometry, Phase and Gain
Automatic Geometry -> Not used Adjusts image position for
centered image
Automatic Phase
-> Not used Calibrates sampling phase
Automatic Gain
-> Not used Calibrates analog amplitude
and analog black level on
input ADC
Video Contrast
Contrast CAL pos -> Adjusts contrast to calibrated
position (value retrieved via
automatic gain)
Man Contrast adjust 0-255 controls analog amplitude on
input ADC
Video Brightness
Brightness CAL pos -> Adjusts brightness to
calibrated position (value
retrieved via automatic gain)
Man Brightness adjust
0-127 controls analog black level
on input ADC
Luminance 100-400 (Cd/m2) 150 Sets target output luminance
in Cd/m2
Geometry
Automatic geometry Adjusts image position for
centered image
Hor Pos 0-600 Adjusts horizontal position
of image
Vert Pos 0-255 Adjusts vertical position of
image
Hor Active 600-1600 Adjust # of horizontal active
pixels
Vert Active 250-1259 Adjusts # of active lines
Scaling None –
Best fit –
Full Screen –
BEST FIT Selects scaling mode
Phase