manualshive.com logo in svg

ZONARE Z.ONE, Руководство по обслуживанию

Поделиться
Скачать
ZONARE Z.ONE Скачать руководство пользователя страница 109

 

Q00110  Rev A  8/06 

Page 109 of 225 

"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"

 

 

17.

 

Install the four longer screws (30808, provided in the kit), through the holes in the mounting 
bracket and into the threaded feet mounting holes in the printer.

 

18.

 

Using the 4mm Allen driver tool (provided in the kit), partially thread the two (2) button-head 
Allen mounting plate retaining screws (31913) into the corresponding holes on the LEFT side 
of the support frame of the SuperCart. 

 

Note:  Leave the screws partially loose, to allow clearance for thickness of mounting plate. 

 

19.

 

Install the assembly to the chassis of the SuperCart, by aligning the large openings in the 
slotted holes of the mounting bracket with the screw heads, and then slipping the bracket 
downwards to lock it in place. 

 

20.

 

Using the 4mm Allen tool provided, fully tighten the two (2) retaining screws. 

21.

 

Connect the BNC Male-to-Female 90-Degree adapter, to the “

VIDEO IN

” connector on the rear 

panel of the UP-897MD printer, and connected the “Printer Video-In” mating end of the BNC 
cable to the adapter. 

 

Figure 49:  UP-897MD Rear Panel View 

Содержание Z.ONE


































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды