Q00110 Rev A 8/06
Page 111 of 225
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
24.
Route all the cables in harness through the rubber grommet in the horizontal facing access hole
(as shown in the following figure), and into the backpack storage area.
25.
Connect the AC power cable for the printer to one of the open receptacles on the AC
Accessory Box, inside the backpack.
26.
Ensure the AC power cable is routed to the far LEFT, and upward, to allow adequate clearance
with the extended gel bottle holder (on the inside of the rear door of the Backpack), when the
door is closed.
27.
Route the “Cart Video Out” cable and “Cart Remote Out” cables out of the exit port at the
top/right (as viewed from the rear) of the backpack, extending the cable far enough that the
large zip-tie is just beyond (and resting on) the rubber grommet (as shown in the following
figure).
Содержание Z.ONE
Страница 1: ......
