Q00110 Rev A 8/06
Page 58 of 225
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
Figure 32: Battery Pack Installation
5.6.3
Docking Scan Engine into SuperCart
STEPS:
3.
While securely grasping the Scan Engine, position the unit with the probe connector facing to
your LEFT, and the CompactFlash access door facing UP.
4.
Carefully align the Scan Engine with the guide slots in the Scan Engine pocket of the
SuperCart.
5.
Lower the Scan Engine into the pocket and press the unit downward fully, retracting the spring
loaded shelf, until the dock-lock plates engage into the slots on the Scan Engine.
Figure 33: Scan Engine to SuperCart Docking
WARNING
To maintain the integrity of the electronic equipment within the
z.one
, it is critically
important that a specific sequence be followed at all times, for turning ON or OFF system
power. The sequences listed below should always be followed.
5.6.4
Docking Scan Engine on miniCart
STEPS:
1.
Hold the Scan Engine centered (horizontally) and rearward above the lily pad on the miniCart.
2.
Line up the tracks on the top surface of lily pad with the tracks on the bottom of the Scan
Engine.
3.
While resting flat on the lily pad surface, gently slide the scan engine directly towards you
(forward), to engage it on the docking latches. Continue to slide the Scan Engine towards you,
until a positive audible "click" is heard.
Содержание Z.ONE
Страница 1: ......
