manualshive.com logo in svg

ZONARE Z.ONE, Руководство по обслуживанию

Поделиться
Скачать
ZONARE Z.ONE Скачать руководство пользователя страница 144

 

Q00110  Rev A  8/06 

Page 144 of 225 

"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"

 

 

16.4.9  Remote Software Upgrade (download) from ZONARE site  

NOTES

:  

It will be necessary to contact Zonare Technical Support, to acquire a unique user name 

and password (for each serial number 

Z.ONE

) in setting up each remote software upgrade 

session

.  

 

The 

Z.ONE

 (SuperCart) will need to be attached to an active direct internet accessible 

connection, at the install site, in order to perform this remote software upgrade procedure.  

1.

 

Dock the Scan Engine in the SuperCart, and ensure the network port on the Rear I/O panel of the 
SuperCart is connected to an active internet connection 

2.

 

Insert a blank USB Memory Stick (CF) into the CF drive at the back of the Scan Engine 

3.

 

Power on the system and allow it to fully boot 

4.

 

Go to the” User Diagnostic Panel” page, and in the “

Zonare Support

” window, enter the IP 

Address, User Name, and Password provided by Tech Support 

5.

 

Click on the 

CHECK

 softkey to open remote communications for determining the available 

software for upgrade 

6.

 

To begin the remote software downloading process, click on the 

UPGRADE

 softkey  

7.

 

At the completion of the downloading of the software installation files to the local USB Memory 
Stick, the system will automatically begin the software upgrade/installation process 

8.

 

Respond accordingly to accept the prompt messages for a normal software installation, to perform 
the software upgrade process 

 

Содержание Z.ONE


































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды