manualshive.com logo in svg

ZONARE Z.ONE, Руководство по обслуживанию

Поделиться
Скачать
ZONARE Z.ONE Скачать руководство пользователя страница 123

 

Q00110  Rev A  8/06 

Page 123 of 225 

"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"

 

 

Note:  Leave the screws partially loose, to allow clearance for thickness of mounting plate. 

 

8.

 

Install the assembly to the chassis of the SuperCart, by aligning the large openings in the 
slotted holes of the mounting bracket with the screw heads, and then slipping the bracket 
downwards to lock it in place. 

 

 

9.

 

Using the 4mm Allen tool provided, fully tighten the three (3) retaining screws. 

10.

 

Route 

all cables in the harness 

through the previously installed rubber grommet in the access 

hole (located on the left/front side of the backpack),  and into the backpack storage area. (Note: 
The images show Orange colored cable ties for clarity. Cables will be supplied with Black 
colored ties.) 

 

20.

 

Route the “Cart S-Video Out” and “Cart Remote Out” cables through the rubber grommet, 
and out of the exit port at the top/right (as viewed from the rear) of the backpack.   

Содержание Z.ONE


































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды