Q00110 Rev A 8/06
Page 197 of 225
"Note: Copies are uncontrolled documents - For revision verification see the Master Documentation List"
Required Tools/Equipment
•
10mm Deep Socket w/ Ratchet
•
LocTite 242 (blue) thread locking compound
Overview of Procedure
•
Remove Caster
•
Set Brake and/or Swivel Lock position
•
Install Caster
Removal of the Caster:
STEPS:
1.
Ensure the
z.one
is powered “OFF”.
2.
Place AC circuit breaker, located at the rear of the SuperCart, in the “OFF” (down) position.
3.
Disconnect the main AC power cord from the rear of the SuperCart.
4.
Fold the LCD display screen down to a horizontal position, for protection from moving during
tilting of Cart.
5.
Lock the brake mechanism (front wheels) to keep the Cart from rolling.
6.
On a soft surface (carpet, etc.) tilt the Cart forward, until it is horizontal, resting on the two front
push handles for support
CAUTION
The Cart may be heavy and care should be taken while tilting forward, use two people if
necessary to avoid injury.
7.
Using a 10mm socket and ratchet, remove the hex-head bolts (through the access holes in the side
of feet on the main chassis) that retain the wheel assembly to the Cart.
8.
Note the position of the brake or swivel for the caster being removed. Remove the caster and
associated hardware and set aside.
Содержание Z.ONE
Страница 1: ......
