YASKAWA MOTOMAN DX100, Руководство по обслуживанию, Страница: 681 / 729

8A
la
rm
DX100
8.3
A
la
rm Me
ssa
ge List
8-566
2 Reference position and target
position enabling control-group
error Software operation
error occurred (1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your Yaskawa representative about occurrence status
(operating procedure).
3 The position data type is not
applicable. Software operation
error occurred (1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your Yaskawa representative about occurrence status
(operating procedure).
4 Coordinated control-group error Software operation
error occurred (1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your Yaskawa representative about occurrence status
(operating procedure).
5 User coordinates number on the
specified tag side error Software operation
error occurred (1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance mode, and
then contact your Yaskawa representative about occurrence status
(operating procedure).
4800 WDT
ERROR(CONVER
TER) Sub Code: Signifies the physical
No. of converter in which the alarm
occurred Connection failure (1)Reset the alarm.(In case of major alarm, turn the power OFF then back
ON.)
(2)If the alarm occurs again, check the connection and inserting state of the
following cables and connectors.
·EAXA01-CN507,510
·EAXB01-CN08
·Converter CN551,553
Module
failure(converter) (1)Reset the alarm.(In case of major alarm, turn the power OFF then back
ON.)
(2)If the alarm occurs again, replace the SERVOPACK.
Alarm
Number
Alarm Name Sub
Code
Meaning Cause Remedy