YASKAWA MOTOMAN DX100, Руководство по обслуживанию, Страница: 335 / 729

8A
la
rm
DX100
8.3
A
la
rm Me
ssa
ge List
8-220
2 The specified axis speed control
function was executed for the axis
which the deceleration stop
function was enabled.
Specified axis speed control
function cannot be used for the
axis which the deceleration stop
function was enabled. Setting error Check the JOB.
1659 MOTOR GUN
CHANGE PG PWR
ON ERR(SV) Setting error Check if the PICK instruction was executed again for the axis where
executed the PICK instruction in the gun change system.
1660 MOTOR GUN
CHANGE SV ON
ERR(SV) Setting error Check if the PICK instruction was executed again for the axis where
executed the PICK instruction in the gun change system.
1661 MOTOR GUN
COND. FILE NO.
ERR(SV) Setting error Check the JOB.
File setting error Check the gun condition file.
1662 MOTOR GUN
PRESS FILE NO.
ERR(SV) Setting error Check the JOB.
File setting error Check the gun condition file.
1663 WRONG MOTOR
GUN PRESS AXIS
(SV) Setting error Check the JOB.
File setting error Check the gun condition file.
1664 MICRO PRG
EXECUTE TIME
OVER(SV) EAXA board failure (1)Reset the alarm.(In case of major alarm, turn the power OFF then back
ON.)
(2)If the alarm occurs again, replace the EAXA board. Save the CMOS.BIN
before replace the board to be safe.
Alarm
Number
Alarm Name Sub
Code
Meaning Cause Remedy