YASKAWA MOTOMAN DX100, Руководство по обслуживанию, Страница: 208 / 729

8A
la
rm
DX100
8.3
A
la
rm Me
ssa
ge List
8-93
0609 MEDAR
PARAMETER
ERROR MADER timer error Refer to the instruction manual for the MEDAR function.
0610 MEDAR STEPPER
TRANSMIT
ERROR MADER timer error Refer to the instruction manual for the MEDAR function.
0710 LADDER
INITIALIZE
ERROR Data error (1)Turn the power OFF then back ON.
(2)If the alarm occurs again, initialize the appropriate data in maintenance
mode, and then load the data saved in the external memory device.
YCP01 board failure (1)Turn the power OFF then back ON.
(2)If the alarm occurs again, replace the YCP01 board. Save the CMOS.BIN
before replace the board to be safe. Replace the YCP01 board, and then
remove the CF from the failure YCP01 board to insert it into the new YCP01
board.
YIF board failure (1)Turn the power OFF then back ON.
(2)If the alarm occurs again, replace the YIF01 board. Save the CMOS.BIN
before replace the board to be safe. Replace the YIF01 board, and then load
the CMOS.BIN saved before alarm occurred.
0720 LADDER
PROGRAM
ERROR 1 An error was found in the relay No.
specification. Data error (1)Turn the power OFF then back ON.
(2)If the alarm occurs again, initialize the appropriate data in maintenance
mode, and then load the data saved in the external memory device.
YCP01 board failure (1)Turn the power OFF then back ON.
(2)If the alarm occurs again, replace the YCP01 board. Save the CMOS.BIN
before replace the board to be safe. Replace the YCP01 board, and then
remove the CF from the failure YCP01 board to insert it into the new YCP01
board.
Alarm
Number
Alarm Name Sub
Code
Meaning Cause Remedy