Yamaha RCX240, Руководство пользователя

Страница: 319 / 620

4-240
Chapter 4 OPERATION
4
1
2
3
5
6
7
8
9
10
Chapter 4 OPERATION
4-241
12. "SYSTEM" mode
2
Select the parameter with the cursor ( / ) keys.
c
CAUTION
Changes you made to the IP address and subnet mask are enabled after restarting
the robot controller. When connecting the robot controller to an existing network,
always consult with the network administrator for the IP address, subnet mask and
gateway settings.
ＳＹＳＴＥＭ ＞ＰＡＲＡＭ＞ＯＰ．ＢＲＤ＞ＳＥＬＥＣＴ Ｖ１０．０１
１．ｂｏａｒｄ ｃｏｎｄｉｔｉｏｎ ＶＡＬＩＤ
２．ＩＰ ａｄｄｒｅｓｓ １９２．１６８． ０． ２
３．Ｓｕｂｎｅｔ ｍａｓｋ ２５５．２５５．２５５． ０
４．ｇａｔｅｗａｙ １９２．１６８． ０． １
５．ｐｏｒｔ Ｎｏ ２３
ＥＤＩＴ ＪＵＭＰ
Network setting (3)
3
Press (EDIT).
4
Set the parameters.
When changing the "Board condition" parameter, press (INVALID) to disable the
Ethernet unit or press (VALID) to enable the Ethernet unit.
When changing the communication mode, press (OFFLINE) to set the offline mode
or press (ONLINE) to set the online mode.
When changing other parameters, use to and to make the setting and
press .
5
Press to quit the edit mode.