Yamaha RCX240, Руководство пользователя

Страница: 195 / 620

4-116
Chapter 4 OPERATION
4
1
2
3
5
6
7
8
9
10
Chapter 4 OPERATION
4-117
11. "MANUAL" mode
11.3.1.1.1 Editing the point in pallet definition
n
NOTE
• Each pallet is generated (outlined) with 5 points, so always specify these 5 points
for pallet definition.
• Point data in the pallet definition must be entered in "mm" units.
• The 5 points should be defined in order from P[1] to P[5]. See "11.3 Displaying,
editing and setting pallet definitions".
1
In "MANUAL>PALLET" mode, press (EDIT).
ＭＡＮＵＡＬ ＞ＰＡＬＬＥＴ＞ＥＤＩＴ ５０％［ＭＧ］［Ｓ０Ｈ０Ｘ］
ｘ ｙ ｚ ｒ
ＰＯＩＮＴ＝Ｐ［１］（Ｐ３９９６）−Ｐ［５］（Ｐ４０００）
Ｐ［１］ ＝ ９８．８７ −２４．５４ １２．３５ −２３．１１
Ｐ［２］ ＝ １２２．６２ −２４．５４ １２．３５ −２３．１１
Ｐ［３］ ＝ ９８．６２ −９４．５４ １２．３５ −２３．１１
［ＰＯＳ］ ０．００ ０．００ ０．００ ０．００
ＵＮＤＯ
Point editing in pallet definition
2
Use the cursor ( / / / ) keys to move the cursor to the
position you want edit.
3
Use to , , , and to enter the point data.
4
Press or cursor up/down ( / ) keys to finish the point data
input.
Pressing aborts the input.
5
To continue editing, repeat steps 2 to 4.
6
Press to quit editing and return to "MANUAL>PALLET" mode.
Valid keys and submenu descriptions in this mode are shown below.
Valid keys Menu Function
/ Moves the cursor.
UNDO
Reverses the last data input and restores the preceding
data.