Yamaha RCX240, Руководство пользователя

Страница: 181 / 620

4-102
Chapter 4 OPERATION
4
1
2
3
5
6
7
8
9
10
Chapter 4 OPERATION
4-103
11. "MANUAL" mode
2
Enter the point number range.
Use to , and to enter the point number range for the copy source and
the point number for the copy destination in the following format.
"(copy start number) – (copy end number), (copy destination number)"
For example, to copy the data between P30 and P34 onto the lines after P50, enter "30
- 34, 50".
n
NOTE
Valid point numbers are from 0 to 9999.
3
Press .
A confirmation message appears on the guideline.
ＭＡＮＵＡＬ ＞ＰＯＩＮＴ ５０％［ＭＧ］［Ｓ０Ｈ０Ｘ］
ｘ ｙ ｚ ｒ
Ｐ３０ ＝ １００．００ ２５０．００ １５．００ ３０．００
Ｐ３１ ＝ ５０．００ １００．００ ５．００ １０．００
Ｐ３２ ＝ １２２．６２ −２４．５４ １２．３５ −２３．１１
ＣＯＭＮＴ： ［ ］
［ＰＯＳ］ ５０．００ １００．００ ５．００ １０．００
（３０−３４，５０）Ｃｏｐｙ ＯＫ？ ＹＥＳ ＮＯ
Copying point data (2)
4
Press (YES) to make a copy.
The point data in the selected range is copied onto the data lines starting from the
specified copy destination number.
Press (NO) if you want to cancel the copy.
11.2.6 Erasing point data
1
Press (ERASE) in "MANUAL>POINT" mode.
The message "Erase (####-####)>" appears on the guideline.
ＭＡＮＵＡＬ ＞ＰＯＩＮＴ ５０％［ＭＧ］［Ｓ０Ｈ０Ｘ］
ｘ ｙ ｚ ｒ
Ｐ３０ ＝ １００．００ ２５０．００ １５．００ ３０．００
Ｐ３１ ＝ ５０．００ １００．００ ５．００ １０．００
Ｐ３２ ＝ １２２．６２ −２４．５４ １２．３５ −２３．１１
ＣＯＭＮＴ： ［ ］
［ＰＯＳ］ ５０．００ １００．００ ５．００ １０．００
Ｅｒａｓｅ（＃＃＃＃−＃＃＃＃）＞
Erasing point data (1)