Ronde & Schwarz 1304.0004K03, Руководство пользователя

Страница: 607 / 1071

Remote Commands
R&S
®
FPL1000
607 User Manual 1178.3370.02 ─ 11
INSTrument:CREate[:NEW] <ChannelType>, <ChannelName>
This command adds an additional measurement channel. You can configure up to 10
measurement channels at the same time (depending on available memory).
See also
●
INSTrument[:SELect]
on page 609
●
INSTrument:DELete
on page 608
Parameters:
<ChannelType> Channel type of the new channel.
For a list of available channel types see
INSTrument:LIST?
on page 608.
<ChannelName> String containing the name of the channel.
Note that you can not assign an existing channel name to a new
channel; this will cause an error.
Example: INST:CRE SAN, 'Spectrum 2'
Adds an additional spectrum display named "Spectrum 2".
Manual operation: See "New Channel Setup" on page 83
INSTrument:CREate:REPLace <ChannelName1>,<ChannelType>,<ChannelName2>
This command replaces a channel setup with another one.
Setting parameters:
<ChannelName1> String containing the name of the channel setup you want to
replace.
<ChannelType> Channel type of the new channel setup.
For a list of available channel setup types see
INSTrument:
LIST?
on page 608.
<ChannelName2> String containing the name of the new channel setup.
Note : If the specified name for a new channel setup already
exists, the default name, extended by a sequential number, is
used for the new channel setup (see
INSTrument:LIST?
on page 608).
Channel names can have a maximum of 31 characters, and
must be compatible with the Windows conventions for file
names. In particular, they must not contain special characters
such as ":", "*", "?".
Example:
INST:CRE:REPL 'IQAnalyzer2',IQ,'IQAnalyzer'
Replaces the channel setup named "IQAnalyzer2" by a new
channel setup of type "IQ Analyzer" named "IQAnalyzer".
Usage: Setting only
Manual operation: See "Replace Current Channel Setup" on page 83
Selecting the Operating Mode and Application