manualshive.com logo in svg

Ronde & Schwarz 1304.0004K03, Руководство пользователя

Поделиться
Скачать
Ronde & Schwarz 1304.0004K03 Скачать руководство пользователя страница 608

Remote Commands

R&S

®

FPL1000

608

User Manual 1178.3370.02 ─ 11

INSTrument:DELete 

<ChannelName>

This command deletes a channel setup.

Setting parameters: 

<ChannelName>

String containing the name of the channel setup you want to
delete.
A channel setup must exist in order to be able delete it.

Usage: 

Setting only

Manual operation: 

See 

"Closing a channel setup"

 

on page 83

INSTrument:LIST?

This command queries all active channel setups. This is useful in order to obtain the
names of the existing channel setups, which are required in order to replace or delete
the channel setups.

Return values: 

<ChannelType>,
<ChannelName>

For each channel setup, the command returns the channel setup
type and channel setup name (see tables below).
Tip: to change the channel setup name, use the 

INSTrument:

REName

 command.

Example: 

INST:LIST?

Result for 3 channel setups:

'ADEM','Analog Demod','IQ','IQ
Analyzer','IQ','IQ Analyzer2'

Usage: 

Query only

Manual operation: 

See 

"Changing the Channel Setup Name"

 

on page 64

See 

"Defining a channel setup"

 

on page 82

See 

"New Channel Setup"

 

on page 83

Table 10-2: Available channel setup types and default channel setup names

Application

<ChannelType> Parameter

Default Channel Setup Name*)

Spectrum

SANALYZER

Spectrum

AM/FM/PM Modulation
Analysis

ADEM

Analog Demod

I/Q Analyzer

IQ

IQ Analyzer

Noise Figure Measure-
ments

NOISE

Noise

Vector Signal Analysis
(VSA)

DDEM

VSA

Note: the default channel setup name is also listed in the table. If the specified name for a new channel
setup already exists, the default name, extended by a sequential number, is used for the new channel
setup.

Selecting the Operating Mode and Application

Содержание 1304.0004K03
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды