Data Management
R&S
®
FPL1000
474
User Manual 1178.3370.02 ─ 11
4. If several items were saved, select which items are restored.
5. If a "Channel" was saved, select whether the settings will replace the settings in the
current "Channel", or whether a new channel setup with the saved settings will be
opened.
6. Select "Recall".
The settings and selected items from the saved measurement are restored and
you can repeat the measurement with the same settings.
Note that any changes made to the settings
after
storing the configuration file will
be overwritten by the stored values when the configuration file is recalled.
To recall settings automatically after preset or reboot
You can define the settings that are restored when you preset or reboot the instrument.
1. Configure the settings as required and save them as described in
2. In the "Save/Recall" menu, select "Startup Recall".
3. From the file selection dialog box, select the recall settings to restore.
4. Select "Select File".
5. Set "Startup Recall" to "On".
Now when you press the [PRESET] key or reboot the instrument, the defined set-
tings will be restored.
6. To restore the factory preset settings, set "Startup Recall" to "Off".
7.3
Import/Export Functions
Access
: "Save"/ "Open" icon in the toolbar > "Import" / "Export"
The R&S
FPL1000 provides various evaluation methods for the results of the per-
formed measurements. However, you may want to evaluate the data with further, exter-
nal applications. In this case, you can export the measurement data to a standard for-
mat file (ASCII or XML). Some of the data stored in these formats can also be re-
imported to the R&S
FPL1000 for further evaluation later, for example in other applica-
tions.
The following data types can be exported (depending on the application):
●
Trace data
●
Table results, such as result summaries, marker peak lists etc.
●
I/Q data
I/Q data can only be imported and exported in applications that process I/Q data, such
as the I/Q Analyzer or optional applications.
See the corresponding user manuals for those applications for details.
Import/Export Functions
