![Ronde & Schwarz 1304.0004K03 Скачать руководство пользователя страница 447](http://html1.mh-extra.com/html/ronde-and-schwarz/1304-0004k03/1304-0004k03_user-manual_1484987447.webp)
The Spectrum Application (RF Measurements)
R&S
®
FPL1000
447
User Manual 1178.3370.02 ─ 11
X-Lock ← Measurement Zoom
If activated, the x-axis of the diagram is not changed during subsequent touch ges-
tures.
Y-Lock ← Measurement Zoom
If activated, the y-axis of the diagram is not changed during subsequent touch ges-
tures.
Adapt Measurement to Zoom (selected diagram) ← Measurement Zoom
If you already performed a graphical zoom using the
on page 446 functions, this function automatically adapts the measure-
ment settings to maintain the currently zoomed display.
Restore Original Display
Restores the original display, that is, the originally calculated displays for the entire
capture buffer, and closes all zoom windows.
Note:
This function only restores graphically zoomed displays. Measurement zooms,
for which measurement settings were adapted, are recalculated based on the adapted
measurement settings. In this case, the zoomed display is maintained.
Remote command:
Single zoom:
DISPlay[:WINDow<n>][:SUBWindow<w>]:ZOOM[:STATe]
Multiple zoom:
DISPlay[:WINDow<n>][:SUBWindow<w>]:ZOOM:MULTiple<zn>[:STATe]
on page 805 (for each multiple zoom window)
6.12.3
How to Zoom Into a Diagram
The remote commands required to zoom into a display are described in
ter 10.8.6, "Zooming into the Display"
The following tasks are described here:
●
"To zoom into the diagram at one position"
●
"To return to original display"
●
"To zoom into multiple positions in the diagram"
●
"To maintain a zoomed display permanently"
For information on how to zoom into a diagram using touch gestures and change the
display permanently, see
Chapter 4.4.4, "Touchscreen Gestures"
To zoom into the diagram at one position
1.
Zoomed Displays