Ronde & Schwarz 1304.0004K03, Руководство пользователя

Страница: 23 / 1071

Getting Started
R&S
®
FPL1000
23 User Manual 1178.3370.02 ─ 11
Set the switch on the power supply to position [0].
See
Chapter 4.2.2.1, "AC Power Supply Connection and Main Power Switch" ,
on page 38.
The LED of the standby key is switched off.
2. Disconnect the R&S FPL1000 from the power source.
4.1.7 Connecting to LAN
You can connect the instrument to a LAN for remote operation via a PC.
For details on the connector, see Chapter 4.2.2.12, "LAN" , on page 41.
Provided the network administrator has assigned you the appropriate rights and adap-
ted the Windows firewall configuration, you can use the interface, for example:
●
To transfer data between a controlling device and the test device, e.g. to run a
remote control program
●
To access or control the measurement from a remote computer using the "Remote
Desktop" application (or a similar tool)
●
To connect external network devices (e.g. printers)
●
To transfer data from a remote computer and back, e.g. using network folders
Network environment
Before connecting the product to a local area network (LAN), consider the following:
●
Install the latest firmware to reduce security risks.
●
For internet or remote access, use secured connections, if applicable.
●
Ensure that the network settings comply with the security policies of your company.
Contact your local system administrator or IT department before connecting your
product to your company LAN.
●
When connected to the LAN, the product may potentially be accessed from the
internet, which may be a security risk. For example, attackers might misuse or
damage the product. For more information about IT security and how to operate
the product in a secure LAN environment, see the Rohde
& Schwarz white paper
1EF96: Malware Protection Windows 10 .
►
NOTICE! Risk of network failure.
Consult your network administrator before performing the following tasks:
● Connecting the instrument to the network
● Configuring the network
● Changing IP addresses
● Exchanging hardware
Errors can affect the entire network.
Connect the R&S
FPL1000 to the LAN via the LAN interface on the rear panel of
the instrument.
Preparing for Use