Ronde & Schwarz 1304.0004K03, Руководство пользователя

Страница: 805 / 1071

Remote Commands
R&S
®
FPL1000
805 User Manual 1178.3370.02 ─ 11
<y2> Diagram coordinates in % of the complete diagram that define
the zoom area.
The lower left corner is the origin of coordinate system. The
upper right corner is the end point of the system.
Range:
0 to 100
Default unit: PCT
Manual operation: See "Multi-Zoom" on page 446
DISPlay[:WINDow<n>][:SUBWindow<w>]:ZOOM:MULTiple<zn>[:STATe] <State>
This command turns the multiple zoom on and off.
Suffix:
<n>
.
Window
<w> subwindow
Not supported by all applications
<zn> Selects the zoom window.
If you turn off one of the zoom windows, all subsequent zoom
windows move up one position.
Parameters:
<State> ON | OFF | 0 | 1
OFF | 0
Switches the function off
ON | 1
Switches the function on
Manual operation: See "Multi-Zoom" on page 446
See "Restore Original Display" on page 447
10.8.7 Configuring the Trace Display and Retrieving Trace Data
The commands required to work with traces are described here.
Commands required to export traces (and other result data) are described in Chap-
ter 10.9.5, "Storing Measurement Results" , on page 935.
● Configuring Standard Traces ................................................................................ 806
● Configuring Spectrograms .................................................................................... 812
● Using Trace Mathematics ..................................................................................... 820
● Retrieving Trace Results .......................................................................................822
● Formats for Returned Values: ASCII Format and Binary Format ..........................825
● Importing and Exporting Traces ............................................................................ 826
● Programming Example: Configuring a Spectrogram .............................................828
Setting Basic Spectrum RF Measurement Parameters