Ronde & Schwarz 1304.0004K03, Руководство пользователя

Страница: 935 / 1071

Remote Commands
R&S
®
FPL1000
935 User Manual 1178.3370.02 ─ 11
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt
This command queries the name of the first available printer.
To query the name of other installed printers, use
SYSTem:COMMunicate:PRINter:
ENUMerate[:NEXT]
on page 935.
Manual operation: See "Printer Name" on page 485
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]
This command queries the name of available printers.
You have to use
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt
on page 935
for this command to work properly.
Manual operation: See "Printer Name" on page 485
SYSTem:COMMunicate:PRINter:SELect<1|2> <arg0>
This command selects the printer that processes jobs sent by the R&S FPL1000.
Use
HCOPy:DESTination<1|2>
to select another output destination.
Suffix:
<1|2>
.
1|2
Irrelevant.
Parameters:
<arg0> String containing the printer name.
Use
•
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt
on page 935and
•
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]
on page 935
to query all available printers.
*RST:
NONE
Manual operation: See "Printer Name" on page 485
10.9.5 Storing Measurement Results
The following commands can be used to store the results of a measurement.
Useful commands for storing results described elsewhere:
●
FORMat[:DATA]
on page 822
Remote commands exclusive to storing results:
FORMat:DEXPort:HEADer
..............................................................................................936
MMEMory:STORe<n>:LIST
.............................................................................................936
MMEMory:STORe<n>:PEAK
...........................................................................................936
Managing Settings and Results