Oridion Capnostream 20p, Руководство оператора

Страница: 93 / 141

Configuring Trends
Portable Bedside Capnograph/Pulse Oximeter 91
EVENT MARKING MODE DETAILED
TREND GRAPHICAL DISPLAY [hour] 4 hour
TREND INCREMENT DISPLAY [min] 1.5 min
NURSE CALL DISABLED
HOME SCREEN STANDARD
HOME IPI DISPLAY (hour) 1 hour
IPI ALARM DISABLED
The Trend Data parameters are Event Marking Mode, Trend Graphical Display and Trend Increment Display.
The Trend Display settings refer to how the screen will be initially be displayed when you enter the Trend
mode. Once you are on the Trend screen, these views can be easily changed using the Zoom feature. These
settings will remain until the monitor is powered off.
Changing the resolution of how often data is stored can be done in the Institutional Defaults screen only (See
Institutional Defaults on page 119 ).
Event Marking Mode
•
Detailed Event Marking: When the Event button is pushed, you can enter a specific description of the
event from a table of 30 user definable values (see the section
Entering Patient Events on page 46 ).
•
Quick Event Marking: Marks that an event occurred when the Event button is pushed, but does not give
any details.
If the monitor is set to Detailed event marking mode, but you don't have time to enter the detailed event, a
quick event mark can be entered by pushing the Event button twice.
Trend Graphical Display
Trend Graphical Display options are 2, 4 and 12 hours. The factory default is 4 hours.
Trend Increment Display
Trend Increment Display options for the Tabular Trend Display are MINIMUM, 1.5, 3, 15 or 60 minutes. The
factory default is 1.5 minutes. The MINIMUM setting is defined as the trend recording resolution and can be 5,
10 or 30 seconds (see
Changing Institutional Defaults on page 119 for instructions on how to change the
recording resolution).
Changing the resolution of how often data is stored can be done in the Institutional Defaults screen only (See
Institutional Defaults on page 119 ).