Oridion Capnostream 20p, Руководство оператора

Страница: 48 / 141

Entering Patient Events
46 Portable Bedside Capnograph/Pulse Oximeter
Entering Patient Events
When scanning patient history in the monitor, it is often useful to have a record of patient events that could have
influenced the recorded readings. The monitor has the ability to record a wide variety of patient events. There
are two options: Quick Events and Detailed Events.
If the monitor is set to record Quick events, pressing the event button ( ) places a mark in the trend memory
showing that an event took place at the date and time the button was pushed. See Table 20 - Tabular Display
Example for an example of a quick event mark.
Detailed events allow the clinician to record more detail. There are three categories of events: administering
medication, physical activity by the patient, and interventions. These events can be marked in the monitor's
memory to assist in tracking patient care and appear in the trend displays and data output.

T
O
U
SE
D
ETAILED
E
VENTS
:
1. Press the event button on the front display panel of the monitor.
2. The table below will appear on the display. Use the control knob to click on an event.
3. Click the control knob again to store the event and return to the HOME screen.
The table below shows the factory default settings. The event names can be changed using the institutional
defaults as described in
Changing Institutional Defaults on page 119 .
Table 8 - Event Markings
MEDICATION PATIENT INTERVENED
Fentanyl EATING OXYGEN
Versed DRINKING SUCTION
MIDAZOLAM COUGHING ADJ AIRWAY
Morphine AMBULATING NARCAN
Demerol CHEST PT ROMAZICON
Propofol TURNED NEB TX
SURFACTANT SNORING STIMULATED
Other OTHER CO2 insuffl*
ABG
OTHER
* CO
2
Insufflation
If the monitor is set to record detailed events, but you do not wish to designate a specific event name, pressing
the
event button twice will record an unlabeled event similar to a quick event mark. This is useful when
there is no time to designate details.
Changing the Alarm and Pulse Volumes
The alarm volume can be made louder or softer for patient alarms and pulse tone. The pulse tone can also be
turned off using the SpO
2
menu. By default, the pulse tone is turned off.
Alarm Volume

T
O MAKE THE ALARM VOLUME LOUDER OR SOFTER
:
1. Use the control knob to select the speaker icon at the right hand side of the menu.