Oridion Capnostream 20p, Руководство оператора

Страница: 126 / 141

Changing Monitor Settings
124 Portable Bedside Capnograph/Pulse Oximeter
knob, and then scroll with the control knob until you reach IPI in the Parameters Available column. Click with
the control knob to place IPI as the first parameters on the trend displays.
Click
BACK>BACK>BACK>HOME
to retain your choices once you are finished changing the trend display.
To return to the default display, click FACTORY DEFAULTS on the Institutional Defaults: Trend: Display
Configuration screen.
Event labels used in Trend recording can also be changed from the Institutional Defaults: Trend screen, using
the menu bar. A detailed explanation appears in
Events , below.
Events
Up to 10 event names in each of three categories can be stored in Capnostream. This allows the attending health
care professional to describe the event that is inputted to the monitor's memory. The three categories are
medication, patient actions and clinician intervention actions.
Most event names are provided as factory defaults with several left blank in each of the three categories.
However, all 30 event names can be edited to provide the most appropriate descriptions for the environment that
the monitor will be used in.
Each event name can be up to 11 alphanumeric characters. If an event name is left blank, a selection of that
event will be stored in trend memory as a Quick event (see
Entering Patient Events on page 46 for information
on using Events).
Medication Events
Allows the institution to enter a set of 10 event labels which the operator can use to mark the administration of
medicine at the time of monitoring. The default medicines are: FENTANYL, VERSED, MIDAZOLAM,
MORPHINE, DEMEROL, PROPOFOL, SURFACTANT, and OTHER. The last three settings are blank. All
settings are changeable. To reset the Medication Events to the factory settings, use the control knob and select
FACTORY DEFAULTS
.
Patient Events
Allows the institution to enter a set of 10 event labels which the operator can use to mark events that happen to
the patient at the time of monitoring. The default Patient Events are: EATING, DRINKING, COUGHING,
AMBULATING, CHEST PT, TURNED, SNORING and OTHER. The last two settings are blank. All settings
are changeable. To reset the Patient Events to the factory defaults, use the control knob and select
FACTORY
DEFAULTS .
Intervention Events
Allows the institution to enter a set of 10 event labels which the operator can use to mark events where a
physical or other intervention occurred during the time of monitoring. The default Intervention Events are:
OXYGEN, SUCTION, ADJ AIRWAY, NARCAN, ROMAZICON, NEB TX, STIMULATED, CO
2
INSUFFL
(CO
2
Insufflation), ABG, and OTHER. The last two settings are blank. All settings are changeable. To reset the
Intervention Events to the factory defaults, use the control knob and select
FACTORY DEFAULTS
.
How to Change Event Defaults
From the Service screen, select the
INST DEFAULTS
screen, and then the
TREND
screen. In the Menu Bar of
the Institutional Settings: Trend screen are the options to select
MED
to change medication events settings,
PAT
to change patient events settings, and
INT
to change intervention events settings. To change an event, scroll to a
particular event label and click it so as to clear the field and enter another event name.
Monitor Settings
From the Institutional Defaults screen, select MONITOR .