Oridion Capnostream 20p, Руководство оператора

Страница: 90 / 141

Tabular Trend Display Screen
88 Portable Bedside Capnograph/Pulse Oximeter
The table below gives a sample of the tabular display at a resolution of 1.5 minutes.
Table 20 - Tabular Display Example
TIME EtCO
2
mmHg
RR
bpm
SpO
2
%
PR
bpm
IPI EVENTS
12:23 AM May 23 10
10 41 17 98 71 9
2 *
12:24 AM May 23 10
40 48 16 98 71 7 5 *
12:26 AM May 23 10
10 49 16 98 70 7 1 21*
12:27 AM May 23 10
40 35 17 98 71 7 22 *
12:29 AM May 23 10
10 29 16 98 71 8
1 22 *
12:30 AM May 23 10
Events are indicated by a triangle (similar to the event button located on the front panel of the monitor) and
alarms are indicated by an asterisk. The number beside each indicates how many alarms or events occurred
during that time period.
4. To see the specific events and alarms, change the
ZOOM
setting to the MINIMUM value, which changes the
zoom level to the lowest time interval. Specific events and high priority red urgent and yellow caution
alarms will now appear in the table and you can use the Scroll option to scroll up and down the table. The
table below gives a sample of the tabular display at the MINIMUM resolution (in this case the minimum
resolution is set at 5 seconds).
Table 21 - Detailed Tabular Display Example
TIME
sec
EtCO
2
mmHg
RR
bpm
SpO
2
%
PR
bpm
IPI EVENTS
3:23 AM May 23 10
05 29 22 99 74 8 PROPOFOL
10 29 20 99 73 8
15 29 20 100 71 8
20 27 16 92 66 4
25 26 14 88 64 4
30 26 14 88 65 4
35 26 14 88 65 4
40 26 14 88 65 4
45 26 14 88 65 4
50 26 14 88 65 4
In the above example, oxygen was given to the patient during the period between 3:23:05 and 3:23:10 AM
followed by a rise in respiration rate to a level that triggered the high value alarm. This is indicated by the
red up arrow. Similarly, a low respiration rate alarm would have a red down arrow.
If the Event Marking Mode is set to QUICK, no text information is available at the lowest zoom level, but
a triangle will still appear to indicate that an event was marked.
5. The monitor will hold up to 72 hours of patient data. If there is more data than you can see on the screen,
then scrolling up will change to display earlier data (if you scroll up) or later data (if you scroll down).