Oridion Capnostream 20p, Руководство оператора

Страница: 50 / 141

Alarm Delay
48 Portable Bedside Capnograph/Pulse Oximeter
CAUTION: The Audio off option (which will create permanent alarm silence) should be set in the
Institutional Defaults only in a situation in which the caregiver is also monitoring the
patient by other means, to avoid the chance of missed alarms.
Alarm Delay
An option for Alarm Delay (for a number of alarms) is available. For more information, see Alarm Delay on
page 72 .
Use of Scavenging System
When the patient is being sedated with a gaseous anesthetic, a scavenging system can be attached to the
monitor. The gas output connection is a barbed style connector intended for 3/32 inch ID tubing. Using any
appropriate tubing, connect the scavenging system to the gas outlet, located between the FilterLine and SpO
2
connections, as shown below in Figure 19 , below .
Disposal of sampled gases should be carried out according to according to standard operating procedures or
local regulations for the disposal of gases.
Figure 19 - Scavenger System Connection Point
Turning the Pump Off for Suction or Lavage
Use the Pump Off mode whenever performing suction or lavage. During Pump Off mode, pump activity is
suspended to protect the monitor from drawing in liquids which could cause a malfunction.
In the Pump Off mode, the CO
2
module pump is switched OFF for a preset time to prevent liquids from
entering the monitor.
WARNING: If at any time the device displays the FILTERLINE BLOCKAGE message, replace the
FilterLine.

T
O CHANGE THE PUMP MODE
:
1. Before performing lavage or suction, press the Pump Off button located on the front of the monitor.
The CO
2
module pump turns off, the countdown timer begins and the Pump Off screen is displayed. The
countdown timer is shown in the CO
2
waveform area.
Scavenger system Connection Point