Oridion Capnostream 20p, Руководство оператора

Страница: 128 / 141

Changing Monitor Settings
126 Portable Bedside Capnograph/Pulse Oximeter
CO
2
Parameters
Institutional Defaults can be set for all CO
2
parameters that are settable in the monitor. To change the
parameters, select CO
2
in the Institutional Defaults screen.
Parameter Choices Factory Default
CO
2
Units mmHg, kPa, Vol% mmHg
BTPS* On/Off On
FiCO
2
Display On/Off On
Pump-Off Timeout (minutes) 5, 10, 15 or 30 15
CO
2
Waveform Scale (mmHg) 50, 100, 150, Auto Auto
EtCO
2
Scale for Trend Display 50, 100, 150 50
RR Scale for Trend Display 50, 100, 150 50
Sweep Speed Adult/Pediatric (mm/sec) 3, 6.3, 12.5, 25 6.3
Sweep Speed Infant/Neonatal (mm/sec) 3, 6.3, 12.5, 25 6.3
* BTPS denotes the standard correction used during measurement for body temperature, pressure, and saturation.
BTPS should be set to ON during all measurement procedures. The device automatically turns off the BTPS
correction during calibration procedures and turns it on again following these procedures. There is no need for the
user to make any changes to the BTPS setting.
SpO
2
Parameters
Institutional Defaults can be set for all SpO
2
parameters that are settable in the monitor. To change the
parameters, select SpO
2
in the Institutional Defaults screen.
Parameter Choices Factory Default
Pulse Tone On/Off Off
Sat-Seconds On/Off On
SpO
2
Scale for Trend Display 0-100, 50-100 50-100
PR Scale for Trend Display 150, 300 150
Sweep Speed Adult/Pediatric (mm/sec) 3, 6.3, 12.5, 25 25
Sweep Speed Infant/Neonatal (mm/sec) 3, 6.3, 12.5, 25 25