Oridion Capnostream 20p, Руководство оператора

Страница: 43 / 141

Capnostream®20p: Operational Check Sheet
Portable Bedside Capnograph/Pulse Oximeter 41

10. Open a Patient Case
•
To record patient data so that it is easy to track and retrieve, opening a patient case is recommended.
Opening a patient case is required when recording a Tabular Case Report.
•
Refer to Using Patient Cases and Patient ID Numbers on page 44 for instructions.

11. Print Patient Data
•
Choose the desired type of patient report and press the PRINT button on the screen.
•
Refer to Chapter 11 Reports on page 93 for detailed information.

12. Set Up Nurse Call Operation (if applicable; Nurse Call connectivity accessories must be
purchased separately)
•
Plug the Nurse Call cable into the Nurse Call socket on the back of the monitor and connect the
other end of the cable to the institution's system as determined by the institution's requirements.
Check that all cables are connected and tightened.
•
Enable Nurse Call on the monitor as described in Nurse Call Operation on page 107 .
•
Verify communication between the monitor and the Nurse Call system.

13. Set Up Bernoulli System Interface (if applicable; central monitoring system and accessories must
be purchased separately)
•
Connect the Client Bridge to the RS-232 port at the back of the monitor. Make sure that all
connections are in place and sufficiently tightened.
•
Verify that the Client Bridge is mounted safely.
•
Verify communication between the Capnostream monitor, the client bridge and the Bernoulli central
station.
•
See Operation with Hospital Patient Data Systems on page 110 for more details.

14. Set Up Data Transfer via USB (USB flash drive must be purchased separately)
•
Connect the USB Flash drive to the back of the monitor.
•
Choose the desired type of patient report and press the Start USB button on the screen.
•
Refer to Data Transfer via the USB Data Port on page 103 for detailed information.