Oridion Capnostream 20p, Руководство оператора

Страница: 89 / 141

Tabular Trend Display Screen
Portable Bedside Capnograph/Pulse Oximeter 87
To view more information about the displayed patient, use the control knob to select the TABULAR trend
display on the Menu Bar, and see the instructions below in the section Tabular Trend Display Screen on
page 87 .
Tabular Trend Display Screen

T
O
V
IEW THE
T
ABULAR
T
REND
D
ISPLAY
S
CREEN
:
1. In the graphical trend mode, use the control knob to select
TABULAR
from the Menu Bar. The Tabular
Trend display screen will appear. To enter the Tabular Trend mode from the Home screen, click TREND on
the Menu bar and then
TABULAR
on the Menu bar.
Figure 33 - Tabular Trend Display
2. Note that the real time patient data is displayed on the right hand side of the screen, while the left side of the
screen displays the Tabular Trend with detailed historic patient data.
3. Click ZOOM on the Menu bar to change the time resolution from the current display to 60, 15, 3 or 1.5
minutes or the MINIMUM setting. The MINIMUM setting is defined as the trend recording resolution and
can be 5, 10 or 30 seconds (see
Institutional Defaults on page 119 for instructions on how to change the
recording resolution).
The controls for viewing tabular data are:
•
GRAPHICAL – switches the display from to Graphical from Tabular display (in the Graphical trend
display, this changes to Tabular)
•
SCROLL – allows you to scroll through the table of patient data.
•
ZOOM - allows you to increase or decrease how much time is averaged into each data point shown in the
table. At the lowest setting, the zoom allows you to examine detailed alarms and events.
•
PRINT TREND
– provides a printout of the trend display currently seen on the screen.
•
ALARM LIMITS – displays the Alarm Limits screen to allow you to see what the settings are, and change
them if necessary.