![background image](http://html.mh-extra.com/html/mitsubishi-electric/mr-j4-100a-rj/mr-j4-100a-rj_instruction-manual_238540252.webp)
5. PARAMETERS
5 - 49
No./symbol/
name
Setting
digit
Function
Initial
value
[unit]
Control
mode
P S T
PC32
CMX2
Commanded
pulse
multiplication
numerator 2
To enable the parameter, select "Electronic gear (0 _ _ _)", "J3 electronic gear
setting value compatibility mode (2 _ _ _)", or "J2S electronic gear setting value
compatibility mode (3 _ _ _)" of "Electronic gear selection" in [Pr. PA21].
Setting range: 1 to 16777215
1
PC33
CMX3
Commanded
pulse
multiplication
numerator 3
To enable the parameter, select "Electronic gear (0 _ _ _)", "J3 electronic gear
setting value compatibility mode (2 _ _ _)", or "J2S electronic gear setting value
compatibility mode (3 _ _ _)" of "Electronic gear selection" in [Pr. PA21].
Setting range: 1 to 16777215
1
PC34
CMX4
Commanded
pulse
multiplication
numerator 4
To enable the parameter, select "Electronic gear (0 _ _ _)", "J3 electronic gear
setting value compatibility mode (2 _ _ _)", or "J2S electronic gear setting value
compatibility mode (3 _ _ _)" of "Electronic gear selection" in [Pr. PA21].
Setting range: 1 to 16777215
1
PC35
TL2
Internal
torque limit
2/internal
thrust limit 2
Set the parameter on the assumption that the maximum torque or thrust is 100.0%.
The parameter is for limiting the torque of the servo motor or the thrust of the linear
servo motor.
No torque or thrust is generated when this parameter is set to "0.0".
When TL1 (Internal torque limit selection) is turned on, Internal torque limits 1 and 2
are compared and the lower value will be enabled.
Set the parameter referring to section 3.6.1 (5).
Setting range: 0.0 to 100.0
100.0
[%]
Содержание MR-J4-100A(-RJ)
