![background image](http://html.mh-extra.com/html/mitsubishi-electric/mr-j4-100a-rj/mr-j4-100a-rj_instruction-manual_238540109.webp)
3. SIGNALS AND WIRING
3 - 26
You can also use a ferrule to connect with the connectors. When you use a ferrule, use the following
ferrules and crimp terminal.
Servo amplifier
Wire size
Ferrule model (Phoenix Contact)
Crimp terminal
(Phoenix Contact)
For one
For two
MR-J4-10A(-RJ)
to
MR-J4-100A(-RJ)
AWG 16
AI1.5-10BK
AI-TWIN2×1.5-10BK
AWG 14
AI2.5-10BU
MR-J4-200A(-RJ)
to
MR-J4-350A(-RJ)
AWG 16
AI1.5-10BK
AI-TWIN2×1.5-10BK
AWG 14
AI2.5-10BU
AI-TWIN2×2.5-10BU
AWG 12
AI4-10GY
CRIMPFOX-ZA3
MR-J4-60A4(-RJ)
to
MR-J4-350A4(-RJ)
AWG 16
AI1.5-10BK
AI-TWIN2×1.5-10BK
AWG 14
AI2.5-10BU
MR-J4-10A1(-RJ)
to
MR-J4-40A1(-RJ)
AWG 16
AI1.5-10BK
AI-TWIN2×1.5-10BK
AWG 14
AI2.5-10BU
(b) Inserting wire
Insert only one wire or ferrule to each wire insertion hole.
Insert the open tool as follows and push it down to open the spring. While the open tool is pushed
down, insert the stripped wire into the wire insertion hole. Check the wire insertion depth, and make
sure that the cable insulator will not be caught by the spring and that the conductive part of the
stripped wire will not be exposed.
Release the open tool to fix the wire. Pull the wire lightly to confirm that the wire is surely connected.
In addition, make sure that no conductor wire sticks out of the connector.
The following shows a connection example of the CNP3 connector for MR-J4-200A(-RJ) and MR-J4-
350A(-RJ).
1) Push down the open tool.
3) Release the open tool to fix the wire.
2) Insert the wire.
Содержание MR-J4-100A(-RJ)
