Mitsubishi Electric MR-J4-100A(-RJ), Инструкция по эксплуатации

Страница: 877 / 908

APPENDIX
App. - 62
App. 10.3.3 Specifications
(a) Special coating
Using the MR-J4 series in an atmosphere containing a corrosive gas may cause its corrosion with
time, resulting in a malfunction. For the printed circuit board of the servo amplifiers with a special
coating specification, a urethane coating agent is applied to some parts capable of being coated
technically (except LEDs, connectors, terminal blocks, etc.) to improve the resistance to corrosive
gases. Use a servo amplifier with a special coating specification specifically for applications
susceptible to corrosive gases, including tire manufacturing and water treatment. Although the
special coating-specification products have the improved resistance to corrosive gases, proper
operations in environments mentioned above are not guaranteed. Therefore, perform periodic
inspections for any abnormality.
(b) Standard for corrosive gases
In IEC 60721-3-3, corrosive gases refer to sea salt, sulfur dioxide, hydrogen sulfide, chlorine,
hydrogen chloride, hydrogen fluoride, ammonia, ozone, and nitrogen oxides shown in the
environmental parameter column of the table below.
The table also shows the corrosive gas concentrations defined in IEC 60721-3-3, Class 3C2.
Environmental parameter Unit
3C2
Mean value Maximum value
a) Sea salt None Salt mist
b) Sulfur dioxide cm 3 /m 3 0.11 0.37
c) Hydrogen sulfide cm
3
/m
3
0.071 0.36
d) Chlorine cm 3 /m 3 0.034 0.1
e) Hydrogen chloride cm 3 /m 3 0.066 0.33
f) Hydrogen fluoride cm 3 /m 3 0.012 0.036
g) Ammonia cm
3
/m
3
1.4 4.2
h) Ozone cm 3 /m 3 0.025 0.05
i) Nitrogen oxides cm 3 /m 3 0.26 0.52
The special coating-specification products have the improved corrosion resistance in environments
with corrosive gas concentrations conforming to IEC 60721-3-3, Class 3C2. We tested typical
models and confirmed that their corrosive gas resistance was improved, compared with the standard
models.