Mitsubishi Electric MR-J4-100A(-RJ), Инструкция по эксплуатации

Страница: 584 / 908

14. COMMUNICATION FUNCTION (MITSUBISHI ELECTRIC GENERAL-PURPOSE AC SERVO PROTOCOL)
14 - 17
14.4.2 Writing commands
(1) Status display (command [8] [1])
Command Data No. Description Setting range Frame length
[8] [1] [0] [0] Status display data deletion 1EA5 4
(2) Parameters (command [9] [4], [8] [5])
Command Data No. Description Setting range Frame length
[9] [4] [0] [1] to [F] [F] Writing each parameter
Writes the values of the parameters in the parameter group specified
with the command [8] [5] + data No. [0] [0]. Before writing the values,
therefore, always specify the parameter group with the command [8]
[5] + data No. [0] [0].
The decimal equivalent of the data No. value (hexadecimal)
corresponds to the parameter No.
Depending on the
parameter 12
[8] [5] [0] [0] Parameter group writing
0000: Basic setting parameters ([Pr. PA_ _ ])
0001: Gain/filter parameters ([Pr. PB_ _ ])
0002: Extension setting parameters ([Pr. PC_ _ ])
0003: I/O setting parameters ([Pr. PD_ _ ])
0004: Extension setting 2 parameters ([Pr. PE_ _ ])
0005: Extension setting 3 parameters ([Pr. PF_ _ ])
000B: Linear servo motor/DD motor setting parameters ([Pr. PL_ _ ])
(Note)
0000 to 0005 4
Note. This is not available with the MR-J4-03A6(-RJ) servo amplifier.
(3) External I/O signals (command [9] [2])
Command Data No. Description Setting range Frame length
[9] [2] [6] [0] Communication input device signal Refer to section
14.5.5. 8
(4) Alarm history (command [8] [2])
Command Data No. Description Setting range Frame length
[8] [2] [2] [0] Alarm history clear 1EA5 4
(5) Current alarm (command [8] [2])
Command Data No. Description Setting range Frame length
[8] [2] [0] [0] Alarm clear 1EA5 4
(6) I/O device prohibition (command [9] [0])
Command Data No. Description Setting range Frame length
[9] [0] [0] [0] Turns off the input device, external analog input signal or pulse train
input, except EMG, LSP and LSN, independently of the external on/off
status. 1EA5 4
[0] [3] Disables all output devices (DO). 1EA5 4
[1] [0] Cancels the prohibition of the input device, external analog input
signal or pulse train input, except EMG, LSP and LSN. 1EA5 4
[1] [3] Cancels the prohibition of the output device. 1EA5 4