CHAPTER 1 SCREEN OPERATIONS
3. Setup Screens
I
– 198
3.9 Tool Measurement screen
The tool length is measured on this screen and set as tool offset data.
Tool length measurement
I
When the tool is at the reference point, the distance from the tool tip to the measurement point
(workpiece upper end) is measured, and can be set as tool offset data.
Reference point
Movement amount
(Tool offset data)
Workpiece
Table
Start
Using a reference point return, etc., position the
tool at the reference point.
Select the measurement tool.
Turn ON the TLM switch of the machine
operation board.
Using JOG feed, manual handle feed, etc.,
move
When the measurement is completed, designate
the tool offset No.
Finish
Tool length measurement
II
When the tool is at the reference point, the distance from the reference point to the tool tip is
measured, and can be set as tool offset data.
Tool offset data
(internal computing)
tlml
(operat
ion p
a
ram
e
te
r)
Gauge block
Reference surface
height
Reference point
Movement amount
Table
Confirm the value of the operation parameter
"tlml".
When using the gauge block, etc., set the value
of the reference height.
Start
Using a reference point return, etc., position the
tool at the reference point.
Select the measurement tool.
Turn ON the TLM switch of the machine
operation board.
Using JOG feed, manual handle feed, etc.,
move the tool to the measurement point.
When the measurement is completed,
designate the tool offset No.
Finish
Downloaded from
Содержание MELDAS 600M Series
