CHAPTER 1 SCREEN OPERATIONS
5. Diagnosis Screens
I
– 258
5.3.1 Displaying the PLC device data
The various status signals and register data used in the PLC can be monitored and displayed.
When this screen is first selected, the respective 16-byte amounts of input/output data are displayed
from device "X0000" on the left display area, and from device "Y0000" on the right side.
This screen constantly monitors and displays the PLC signal statuses. Consequently, when signals are
changed in the PLC, the display is changed according to the changes.
Note that because time differences occur between the PLC signal change and the signal display, there
may be a delay in the display. The machine may also not be able to correspond to extremely brief signal
changes.
(1) Displaying the data of a random device No. "X0020"
1)
2)
The device "X0020" appears at the head of the valid
display area.
(Note)
When setting the device No., an error will occur if a number exceeding the
specifications or an illegal address is set.
(2) Changing the display with the page keys
The valid area device Nos. change in page units when
/
is pressed.
1)
The data is displayed from the next number currently
displayed.
Press the menu tab key
←
,
→
, and select the area to
display the data.
Set the device No. (X0020),
and press the
INPUT
key.
Press the
key.
Downloaded from
Содержание MELDAS 600M Series
